FT Abgastemperatur

Thermocouple Conditioner type K with 0-5v output.

Type K thermocouple conditioner

One channel

0-5V analog output

Voltage: 12V

Used with WB-O2 Datalogger or PRO24 Datalogger

EGT thermocouple not included

Dimensions: 45mm x 36mm x 24mm

FEATURES

The FuelTech EGT-4 CAN is compatible with any type K thermocouple (grounded junction or not).

4 channel signal conditioner with CAN bus communication for PowerFT ECU's, can be used to read EGT's, CHT's, oil, air, water or any other temperature using a type K thermocouple.

Works as an input expander for PowerFT ECU's, freeing up 4 white input channels to be used ofr other purposes.

With the possibility to use up to 4 EGT-4 modules in the same installation, as much as 16 different channels will be available for all sorts of data aquisition.

Compatible with PowerFT ECU's (FT450, FT550, FT600, FT500LITE and FT 550LITE).

PACKAGES

V8 / 2 units, harnesses and 8 sensors:

w/ 2 harnesses

2 of each 42"/36"/30"/24" Thermocouple sensors included

Add second EGT-4 CAN unit

6 cylinder / 2 units, harnesses and 6 sensors:

w/ 2 harnesses

48"/42"/36"/30"/24"/18" Thermocouple sensors included

Add second EGT-4 CAN unit

4 cylinder / harness and 4 sensors:

w/ harness

42"/36"/30"/24" Thermocouple sensors included

4 rotor / harness and 4 sensors:

w/ harness

4 of the 36" Thermocouple sensors included

3 rotor / harness and 3 sensors:

w/ harness

3 of the 36" Thermocouple sensors included

2 rotor / harness and 2 sensors:

w/ harness

2 of the 36" Thermocouple sensors included

TECH DESCRIPTION

Inputs: 4 type K thermocouple inputs

Outputs: 1 CAN

Dimensions:

Product EGT-4 CAN : 4.33 x 2.28 x 0.7 in

EGT-4 CAN Packaging: 8.78 x 6.38 x 2.36 in

Weight:

Product EGT-4 CAN : 4.87 oz

EGT-4 CAN Packaging without harness 78.75 in: 12.13 oz

Harness SwitchPanel / EGT-4 CAN 78.75 in: 2.54 oz

Contents of packaging:

1 EGT-4 CAN with Harness

1 Installation and operation manual

Warranty:

Worldwide: 1 year

TECHNICAL DESCRIPTION

8 channel conditioner for Type K thermocouples with CAN communication to FT600 / FT550 /FT550LITE / FT500 / FT500LITE / FT450, that can be used to read EGT, oil, air, water temperature, CHT or any other temperature with thermocouple

The 8 channels can be used for different kind of readings. For example, 4 channels to EGT, 1 channel after the turbine, 2 channels for the intercooler and 1 channel for the oil temperature

The EGT-8 CAN is an input channel expansion module when used with an FT600 / FT550 / FT550LITE / FT500 / FT500LITE / FT450 for temperature sensors, freeing up the analog inputs for other sensors

Can be ordered in a (B) version if you are running two EGT-8s on one setup.

*Thermocouples not included.

CONTENTS OF PACKAGING

1 EGT-8 CAN

1 EGT-8 Harness (optional)

1 Operation and installation guide

The new FuelTech Thermocouple with Exposed Tip offers faster and more accurate temperature reading for exhaust gases.

The exposed tip gives the sensor a lower thermal inertia, allowing for faster reading during temperature variation.

Temperature range: 32°F to 2200°F Available wire lengths: 18” / 24” / 30” / 36” / 42” / 48”

The K-Type EGT Probe is compatible with the EGT-8 CAN and ETM-1 conditioners.

Includes weld-in bung for installation, also includes extra ferrule to make compatible with other brands EGT bungs.